WWWWWW

Current Directory: /opt/saltstack/salt/lib/python3.10/site-packages/salt/output
Viewing File: /opt/saltstack/salt/lib/python3.10/site-packages/salt/output/highstate.py
"""
Outputter for displaying results of state runs
==============================================

The return data from the Highstate command is a standard data structure
which is parsed by the highstate outputter to deliver a clean and readable
set of information about the HighState run on minions.

Two configurations can be set to modify the highstate outputter. These values
can be set in the master config to change the output of the ``salt`` command or
set in the minion config to change the output of the ``salt-call`` command.

state_verbose:
    By default `state_verbose` is set to `True`, setting this to `False` will
    instruct the highstate outputter to omit displaying anything in green, this
    means that nothing with a result of True and no changes will not be printed

state_output:
    The highstate outputter has six output modes,
    ``full``, ``terse``, ``mixed``, ``changes`` and ``filter``

    * The default is set to ``full``, which will display many lines of detailed
      information for each executed chunk.

    * If ``terse`` is used, then the output is greatly simplified and shown in
      only one line.

    * If ``mixed`` is used, then terse output will be used unless a state
      failed, in which case full output will be used.

    * If ``changes`` is used, then terse output will be used if there was no
      error and no changes, otherwise full output will be used.

    * If ``filter`` is used, then either or both of two different filters can be
      used: ``exclude`` or ``terse``.

        * for ``exclude``, state.highstate expects a list of states to be excluded (or ``None``)
          followed by ``True`` for terse output or ``False`` for regular output.
          Because of parsing nuances, if only one of these is used, it must still
          contain a comma. For instance: `exclude=True,`.

        * for ``terse``, state.highstate expects simply ``True`` or ``False``.

      These can be set as such from the command line, or in the Salt config as
      `state_output_exclude` or `state_output_terse`, respectively.

    The output modes have one modifier:

    ``full_id``, ``terse_id``, ``mixed_id``, ``changes_id`` and ``filter_id``
    If ``_id`` is used, then the corresponding form will be used, but the value for ``name``
    will be drawn from the state ID. This is useful for cases where the name
    value might be very long and hard to read.

state_tabular:
    If `state_output` uses the terse output, set this to `True` for an aligned
    output format.  If you wish to use a custom format, this can be set to a
    string.

state_output_pct:
    Set `state_output_pct` to `True` in order to add "Success %" and "Failure %"
    to the "Summary" section at the end of the highstate output.

state_compress_ids:
    Set `state_compress_ids` to `True` to aggregate information about states
    which have multiple "names" under the same state ID in the highstate output.
    This is useful in combination with the `terse_id` value set in the
    `state_output` option when states are using the `names` state parameter.

Example usage:

If ``state_output: filter`` is set in the configuration file:

.. code-block:: bash

    salt '*' state.highstate exclude=None,True


means to exclude no states from the highstate and turn on terse output.

.. code-block:: bash

    salt twd state.highstate exclude=problemstate1,problemstate2,False


means to exclude states ``problemstate1`` and ``problemstate2``
from the highstate, and use regular output.

Example output for the above highstate call when ``top.sls`` defines only
one other state to apply to minion ``twd``:

.. code-block:: text

    twd:

    Summary for twd
    ------------
    Succeeded: 1 (changed=1)
    Failed:    0
    ------------
    Total states run:     1


Example output with no special settings in configuration files:

.. code-block:: text

    myminion:
    ----------
              ID: test.ping
        Function: module.run
          Result: True
         Comment: Module function test.ping executed
         Changes:
                  ----------
                  ret:
                      True

    Summary for myminion
    ------------
    Succeeded: 1
    Failed:    0
    ------------
    Total:     0
"""

import collections
import logging
import pprint
import re
import textwrap

import salt.output
import salt.utils.color
import salt.utils.data
import salt.utils.stringutils

log = logging.getLogger(__name__)


def _compress_ids(data):
    """
    Function to take incoming raw state data and roll IDs with multiple names
    into a single state block for reporting purposes. This functionality is most
    useful for any "_id" state_output options, such as ``terse_id``.

    The following example state has one ID and four names.

    .. code-block:: yaml

    mix-matched results:
      cmd.run:
        - names:
          - "true"
          - "false"
          - "/bin/true"
          - "/bin/false"

    With ``state_output: terse_id`` set, this can create many lines of output
    which are not unique enough to be worth the screen real estate they occupy.

    .. code-block:: text

        19:10:10.969049 [  8.546 ms]        cmd.run        Changed   Name: mix-matched results
        19:10:10.977998 [  8.606 ms]        cmd.run        Failed    Name: mix-matched results
        19:10:10.987116 [  7.618 ms]        cmd.run        Changed   Name: mix-matched results
        19:10:10.995172 [  9.344 ms]        cmd.run        Failed    Name: mix-matched results

    Enabling ``state_compress_ids: True`` consolidates the state data by ID and
    result (e.g. success or failure). The earliest start time is chosen for
    display, duration is aggregated, and the total number of names if shown in
    parentheses to the right of the ID.

    .. code-block:: text

        19:10:46.283323 [ 16.236 ms]        cmd.run        Changed   Name: mix-matched results (2)
        19:10:46.292181 [ 16.255 ms]        cmd.run        Failed    Name: mix-matched results (2)

    A better real world use case would be passing dozens of files and
    directories to the ``names`` parameter of the ``file.absent`` state. The
    amount of lines consolidated in that case would be substantial.
    """
    if not isinstance(data, dict):
        return data

    compressed = {}

    # any failures to compress result in passing the original data
    # to the highstate outputter without modification
    try:
        for host, hostdata in data.items():
            compressed[host] = {}
            # count the number of unique IDs. use sls name and result in the key
            # so differences can be shown separately in the output
            id_count = collections.Counter(
                [
                    "_".join(
                        map(
                            str,
                            [
                                tname.split("_|-")[0],
                                info["__id__"],
                                info["__sls__"],
                                info["result"],
                            ],
                        )
                    )
                    for tname, info in hostdata.items()
                ]
            )
            for tname, info in hostdata.items():
                comps = tname.split("_|-")
                _id = "_".join(
                    map(
                        str, [comps[0], info["__id__"], info["__sls__"], info["result"]]
                    )
                )
                # state does not need to be compressed
                if id_count[_id] == 1:
                    compressed[host][tname] = info
                    continue

                # replace name to create a single key by sls and result
                comps[2] = "_".join(
                    map(
                        str,
                        [
                            "state_compressed",
                            info["__sls__"],
                            info["__id__"],
                            info["result"],
                        ],
                    )
                )
                comps[1] = "{} ({})".format(info["__id__"], id_count[_id])
                tname = "_|-".join(comps)

                # store the first entry as-is
                if tname not in compressed[host]:
                    compressed[host][tname] = info
                    continue

                # subsequent entries for compression will use the lowest
                # __run_num__ value, the sum of the duration, and the earliest
                # start time found
                compressed[host][tname]["__run_num__"] = min(
                    info["__run_num__"], compressed[host][tname]["__run_num__"]
                )
                compressed[host][tname]["duration"] = round(
                    sum([info["duration"], compressed[host][tname]["duration"]]), 3
                )
                compressed[host][tname]["start_time"] = sorted(
                    [info["start_time"], compressed[host][tname]["start_time"]]
                )[0]

                # changes are turned into a dict of changes keyed by name
                if compressed[host][tname].get("changes") and info.get("changes"):
                    if not compressed[host][tname]["changes"].get("compressed changes"):
                        compressed[host][tname]["changes"] = {
                            "compressed changes": {
                                compressed[host][tname]["name"]: compressed[host][
                                    tname
                                ]["changes"]
                            }
                        }
                    compressed[host][tname]["changes"]["compressed changes"].update(
                        {info["name"]: info["changes"]}
                    )
                elif info.get("changes"):
                    compressed[host][tname]["changes"] = {
                        "compressed changes": {info["name"]: info["changes"]}
                    }
    except Exception:  # pylint: disable=broad-except
        log.warning("Unable to compress state output by ID! Returning output normally.")
        return data

    return compressed


def output(data, **kwargs):  # pylint: disable=unused-argument
    """
    The HighState Outputter is only meant to be used with the state.highstate
    function, or a function that returns highstate return data.
    """
    # If additional information is passed through via the "data" dictionary to
    # the highstate outputter, such as "outputter" or "retcode", discard it.
    # We only want the state data that was passed through, if it is wrapped up
    # in the "data" key, as the orchestrate runner does. See Issue #31330,
    # pull request #27838, and pull request #27175 for more information.
    # account for envelope data if being passed lookup_jid ret
    if isinstance(data, dict) and "return" in data:
        data = data["return"]

    if isinstance(data, dict) and "data" in data:
        data = data["data"]

    # account for envelope data if being passed lookup_jid ret
    if isinstance(data, dict) and len(data.keys()) == 1:
        _data = next(iter(data.values()))

        if isinstance(_data, dict):
            if "jid" in _data and "fun" in _data:
                data = _data.get("return", {}).get("data", data)

    # output() is recursive, if we aren't passed a dict just return it
    if isinstance(data, int) or isinstance(data, str):
        return data

    if data is None:
        return "None"

    # Discard retcode in dictionary as present in orchestrate data
    local_masters = [key for key in data.keys() if key.endswith("_master")]
    orchestrator_output = "retcode" in data.keys() and len(local_masters) == 1

    if orchestrator_output:
        del data["retcode"]

    # pre-process data if state_compress_ids is set
    if __opts__.get("state_compress_ids", False):
        data = _compress_ids(data)

    indent_level = kwargs.get("indent_level", 1)
    ret = [
        _format_host(host, hostdata, indent_level=indent_level)[0]
        for host, hostdata in data.items()
    ]
    if ret:
        return "\n".join(ret)
    log.error(
        "Data passed to highstate outputter is not a valid highstate return: %s", data
    )
    # We should not reach here, but if we do return empty string
    return ""


def _format_host(host, data, indent_level=1):
    """
    Main highstate formatter. can be called recursively if a nested highstate
    contains other highstates (ie in an orchestration)
    """
    host = salt.utils.data.decode(host)

    colors = salt.utils.color.get_colors(
        __opts__.get("color"), __opts__.get("color_theme")
    )
    tabular = __opts__.get("state_tabular", False)
    rcounts = {}
    rdurations = []
    pdurations = []
    hcolor = colors["GREEN"]
    hstrs = []
    nchanges = 0
    strip_colors = __opts__.get("strip_colors", True)

    if isinstance(data, int):
        nchanges = 1
        hstrs.append("{0}    {1}{2[ENDC]}".format(hcolor, data, colors))
        hcolor = colors["CYAN"]  # Print the minion name in cyan
    elif isinstance(data, str):
        # Data in this format is from saltmod.function,
        # so it is always a 'change'
        nchanges = 1
        for data in data.splitlines():
            hstrs.append("{0}    {1}{2[ENDC]}".format(hcolor, data, colors))
        hcolor = colors["CYAN"]  # Print the minion name in cyan
    elif isinstance(data, list):
        # Errors have been detected, list them in RED!
        hcolor = colors["LIGHT_RED"]
        hstrs.append("    {0}Data failed to compile:{1[ENDC]}".format(hcolor, colors))
        for err in data:
            if strip_colors:
                err = salt.output.strip_esc_sequence(salt.utils.data.decode(err))
            hstrs.append("{0}----------\n    {1}{2[ENDC]}".format(hcolor, err, colors))
    elif isinstance(data, dict):
        # Verify that the needed data is present
        data_tmp = {}
        for tname, info in data.items():
            if (
                isinstance(info, dict)
                and tname != "changes"
                and info
                and "__run_num__" not in info
            ):
                err = (
                    "The State execution failed to record the order "
                    "in which all states were executed. The state "
                    "return missing data is:"
                )
                hstrs.insert(0, pprint.pformat(info))
                hstrs.insert(0, err)
            if isinstance(info, dict) and "result" in info:
                data_tmp[tname] = info
        data = data_tmp
        # Everything rendered as it should display the output
        for tname in sorted(data, key=lambda k: data[k].get("__run_num__", 0)):
            ret = data[tname]
            # Increment result counts
            rcounts.setdefault(ret["result"], 0)

            # unpack state compression counts
            compressed_count = 1
            if (
                __opts__.get("state_compress_ids", False)
                and "_|-state_compressed_" in tname
            ):
                _, _id, _, _ = tname.split("_|-")
                count_match = re.search(r"\((\d+)\)$", _id)
                if count_match:
                    compressed_count = int(count_match.group(1))

            rcounts[ret["result"]] += compressed_count
            if "__parallel__" in ret:
                pduration = ret.get("duration", 0)
                try:
                    pdurations.append(float(pduration))
                except ValueError:
                    pduration, _, _ = pduration.partition(" ms")
                    try:
                        pdurations.append(float(pduration))
                    except ValueError:
                        log.error(
                            "Cannot parse a float from duration %s",
                            ret.get("duration", 0),
                        )
            else:
                rduration = ret.get("duration", 0)
                try:
                    rdurations.append(float(rduration))
                except ValueError:
                    rduration, _, _ = rduration.partition(" ms")
                    try:
                        rdurations.append(float(rduration))
                    except ValueError:
                        log.error(
                            "Cannot parse a float from duration %s",
                            ret.get("duration", 0),
                        )

            tcolor = colors["GREEN"]
            if ret.get("name") in ["state.orch", "state.orchestrate", "state.sls"]:
                nested = output(ret["changes"], indent_level=indent_level + 1)
                ctext = re.sub(
                    "^", " " * 14 * indent_level, "\n" + nested, flags=re.MULTILINE
                )
                schanged = True
                nchanges += 1
            else:
                schanged, ctext = _format_changes(ret["changes"])
                # if compressed, the changes are keyed by name
                if schanged and compressed_count > 1:
                    nchanges += len(ret["changes"].get("compressed changes", {})) or 1
                else:
                    nchanges += 1 if schanged else 0

            # Skip this state if it was successful & diff output was requested
            if (
                __opts__.get("state_output_diff", False)
                and ret["result"]
                and not schanged
            ):
                continue

            # Skip this state if state_verbose is False, the result is True and
            # there were no changes made
            if (
                not __opts__.get("state_verbose", False)
                and ret["result"]
                and not schanged
            ):
                continue

            if schanged:
                tcolor = colors["CYAN"]
            if ret["result"] is False:
                hcolor = colors["RED"]
                tcolor = colors["RED"]
            if ret["result"] is None:
                hcolor = colors["LIGHT_YELLOW"]
                tcolor = colors["LIGHT_YELLOW"]

            state_output = __opts__.get("state_output", "full").lower()
            comps = tname.split("_|-")

            if state_output.endswith("_id"):
                # Swap in the ID for the name. Refs #35137
                comps[2] = comps[1]

            if state_output.startswith("filter"):
                # By default, full data is shown for all types. However, return
                # data may be excluded by setting state_output_exclude to a
                # comma-separated list of True, False or None, or including the
                # same list with the exclude option on the command line. For
                # now, this option must include a comma. For example:
                #     exclude=True,
                # The same functionality is also available for making return
                # data terse, instead of excluding it.
                cliargs = __opts__.get("arg", [])
                clikwargs = {}
                for item in cliargs:
                    if isinstance(item, dict) and "__kwarg__" in item:
                        clikwargs = item.copy()

                exclude = clikwargs.get(
                    "exclude", __opts__.get("state_output_exclude", [])
                )
                if isinstance(exclude, str):
                    exclude = str(exclude).split(",")

                terse = clikwargs.get("terse", __opts__.get("state_output_terse", []))
                if isinstance(terse, str):
                    terse = str(terse).split(",")

                if str(ret["result"]) in terse:
                    msg = _format_terse(tcolor, comps, ret, colors, tabular)
                    hstrs.append(msg)
                    continue
                if str(ret["result"]) in exclude:
                    continue

            elif any(
                (
                    state_output.startswith("terse"),
                    state_output.startswith("mixed")
                    and ret["result"] is not False,  # only non-error'd
                    state_output.startswith("changes")
                    and ret["result"]
                    and not schanged,  # non-error'd non-changed
                )
            ):
                # Print this chunk in a terse way and continue in the loop
                msg = _format_terse(tcolor, comps, ret, colors, tabular)
                hstrs.append(msg)
                continue

            state_lines = [
                "{tcolor}----------{colors[ENDC]}",
                "    {tcolor}      ID: {comps[1]}{colors[ENDC]}",
                "    {tcolor}Function: {comps[0]}.{comps[3]}{colors[ENDC]}",
                "    {tcolor}  Result: {ret[result]!s}{colors[ENDC]}",
                "    {tcolor} Comment: {comment}{colors[ENDC]}",
            ]
            if __opts__.get("state_output_profile") and "start_time" in ret:
                state_lines.extend(
                    [
                        "    {tcolor} Started: {ret[start_time]!s}{colors[ENDC]}",
                        "    {tcolor}Duration: {ret[duration]!s}{colors[ENDC]}",
                    ]
                )
            # This isn't the prettiest way of doing this, but it's readable.
            if comps[1] != comps[2]:
                state_lines.insert(3, "    {tcolor}    Name: {comps[2]}{colors[ENDC]}")
            # be sure that ret['comment'] is utf-8 friendly
            try:
                if not isinstance(ret["comment"], str):
                    ret["comment"] = str(ret["comment"])
            except UnicodeDecodeError:
                # If we got here, we're on Python 2 and ret['comment'] somehow
                # contained a str type with unicode content.
                ret["comment"] = salt.utils.stringutils.to_unicode(ret["comment"])
            try:
                comment = salt.utils.data.decode(ret["comment"])
                comment = comment.strip().replace("\n", "\n" + " " * 14)
            except AttributeError:  # Assume comment is a list
                try:
                    comment = ret["comment"].join(" ").replace("\n", "\n" + " " * 13)
                except AttributeError:
                    # Comment isn't a list either, just convert to string
                    comment = str(ret["comment"])
                    comment = comment.strip().replace("\n", "\n" + " " * 14)
            # If there is a data attribute, append it to the comment
            if "data" in ret:
                if isinstance(ret["data"], list):
                    for item in ret["data"]:
                        comment = f"{comment} {item}"
                elif isinstance(ret["data"], dict):
                    for key, value in ret["data"].items():
                        comment = f"{comment}\n\t\t{key}: {value}"
                else:
                    comment = "{} {}".format(comment, ret["data"])
            for detail in ["start_time", "duration"]:
                ret.setdefault(detail, "")
            if ret["duration"] != "":
                ret["duration"] = "{} ms".format(ret["duration"])
            svars = {
                "tcolor": tcolor,
                "comps": comps,
                "ret": ret,
                "comment": salt.utils.data.decode(comment),
                # This nukes any trailing \n and indents the others.
                "colors": colors,
            }
            hstrs.extend([sline.format(**svars) for sline in state_lines])
            changes = "     Changes:   " + ctext
            hstrs.append("{0}{1}{2[ENDC]}".format(tcolor, changes, colors))

            if "warnings" in ret:
                rcounts.setdefault("warnings", 0)
                rcounts["warnings"] += 1
                wrapper = textwrap.TextWrapper(
                    width=80, initial_indent=" " * 14, subsequent_indent=" " * 14
                )
                hstrs.append(
                    "   {colors[LIGHT_RED]} Warnings: {0}{colors[ENDC]}".format(
                        wrapper.fill("\n".join(ret["warnings"])).lstrip(), colors=colors
                    )
                )

        # Append result counts to end of output
        colorfmt = "{0}{1}{2[ENDC]}"
        rlabel = {
            True: "Succeeded",
            False: "Failed",
            None: "Not Run",
            "warnings": "Warnings",
        }
        count_max_len = max([len(str(x)) for x in rcounts.values()] or [0])
        label_max_len = max([len(x) for x in rlabel.values()] or [0])
        line_max_len = label_max_len + count_max_len + 2  # +2 for ': '
        hstrs.append(
            colorfmt.format(
                colors["CYAN"],
                "\nSummary for {}\n{}".format(host, "-" * line_max_len),
                colors,
            )
        )

        def _counts(label, count):
            return "{0}: {1:>{2}}".format(label, count, line_max_len - (len(label) + 2))

        # Successful states
        changestats = []
        if None in rcounts and rcounts.get(None, 0) > 0:
            # test=True states
            changestats.append(
                colorfmt.format(
                    colors["LIGHT_YELLOW"],
                    f"unchanged={rcounts.get(None, 0)}",
                    colors,
                )
            )
        if nchanges > 0:
            changestats.append(
                colorfmt.format(colors["GREEN"], f"changed={nchanges}", colors)
            )
        if changestats:
            changestats = " ({})".format(", ".join(changestats))
        else:
            changestats = ""
        hstrs.append(
            colorfmt.format(
                colors["GREEN"],
                _counts(rlabel[True], rcounts.get(True, 0) + rcounts.get(None, 0)),
                colors,
            )
            + changestats
        )

        # Failed states
        num_failed = rcounts.get(False, 0)
        hstrs.append(
            colorfmt.format(
                colors["RED"] if num_failed else colors["CYAN"],
                _counts(rlabel[False], num_failed),
                colors,
            )
        )

        if __opts__.get("state_output_pct", False):
            # Add success percentages to the summary output
            try:
                success_pct = round(
                    (
                        (rcounts.get(True, 0) + rcounts.get(None, 0))
                        / (sum(rcounts.values()) - rcounts.get("warnings", 0))
                    )
                    * 100,
                    2,
                )

                hstrs.append(
                    colorfmt.format(
                        colors["GREEN"],
                        _counts("Success %", success_pct),
                        colors,
                    )
                )
            except ZeroDivisionError:
                pass

            # Add failure percentages to the summary output
            try:
                failed_pct = round(
                    (num_failed / (sum(rcounts.values()) - rcounts.get("warnings", 0)))
                    * 100,
                    2,
                )

                hstrs.append(
                    colorfmt.format(
                        colors["RED"] if num_failed else colors["CYAN"],
                        _counts("Failure %", failed_pct),
                        colors,
                    )
                )
            except ZeroDivisionError:
                pass

        num_warnings = rcounts.get("warnings", 0)
        if num_warnings:
            hstrs.append(
                colorfmt.format(
                    colors["LIGHT_RED"],
                    _counts(rlabel["warnings"], num_warnings),
                    colors,
                )
            )
        totals = "{0}\nTotal states run: {1:>{2}}".format(
            "-" * line_max_len,
            sum(rcounts.values()) - rcounts.get("warnings", 0),
            line_max_len - 7,
        )
        hstrs.append(colorfmt.format(colors["CYAN"], totals, colors))

        if __opts__.get("state_output_profile"):
            sum_duration = sum(rdurations)
            if pdurations:
                max_pduration = max(pdurations)
                sum_duration = sum_duration + max_pduration
            duration_unit = "ms"
            # convert to seconds if duration is 1000ms or more
            if sum_duration > 999:
                sum_duration /= 1000
                duration_unit = "s"
            total_duration = "Total run time: {} {}".format(
                f"{sum_duration:.3f}".rjust(line_max_len - 5), duration_unit
            )
            hstrs.append(colorfmt.format(colors["CYAN"], total_duration, colors))

    if strip_colors:
        host = salt.output.strip_esc_sequence(host)
    hstrs.insert(0, "{0}{1}:{2[ENDC]}".format(hcolor, host, colors))
    return "\n".join(hstrs), nchanges > 0


def _nested_changes(changes):
    """
    Print the changes data using the nested outputter
    """
    ret = "\n"
    ret += salt.output.out_format(changes, "nested", __opts__, nested_indent=14)
    return ret


def _format_changes(changes, orchestration=False):
    """
    Format the changes dict based on what the data is
    """
    if not changes:
        return False, ""

    if orchestration:
        return True, _nested_changes(changes)

    if not isinstance(changes, dict):
        return True, f"Invalid Changes data: {changes}"

    ret = changes.get("ret")
    if ret is not None and changes.get("out") == "highstate":
        ctext = ""
        changed = False
        for host, hostdata in ret.items():
            s, c = _format_host(host, hostdata)
            ctext += "\n" + "\n".join((" " * 14 + l) for l in s.splitlines())
            changed = changed or c
    else:
        changed = True
        ctext = _nested_changes(changes)
    return changed, ctext


def _format_terse(tcolor, comps, ret, colors, tabular):
    """
    Terse formatting of a message.
    """
    result = "Clean"
    if ret["changes"]:
        result = "Changed"
    if ret["result"] is False:
        result = "Failed"
    elif ret["result"] is None:
        result = "Differs"
    if tabular is True:
        fmt_string = ""
        if "warnings" in ret:
            fmt_string += "{c[LIGHT_RED]}Warnings:\n{w}{c[ENDC]}\n".format(
                c=colors, w="\n".join(ret["warnings"])
            )
        fmt_string += "{0}"
        if __opts__.get("state_output_profile") and "start_time" in ret:
            fmt_string += "{6[start_time]!s} [{6[duration]!s:>7} ms] "
        fmt_string += "{2:>10}.{3:<10} {4:7}   Name: {1}{5}"
    elif isinstance(tabular, str):
        fmt_string = tabular
    else:
        fmt_string = ""
        if "warnings" in ret:
            fmt_string += "{c[LIGHT_RED]}Warnings:\n{w}{c[ENDC]}".format(
                c=colors, w="\n".join(ret["warnings"])
            )
        fmt_string += " {0} Name: {1} - Function: {2}.{3} - Result: {4}"
        if __opts__.get("state_output_profile") and "start_time" in ret:
            fmt_string += " - Started: {6[start_time]!s} - Duration: {6[duration]!s} ms"
        fmt_string += "{5}"

    msg = fmt_string.format(
        tcolor, comps[2], comps[0], comps[-1], result, colors["ENDC"], ret
    )
    return msg
F1l3 Manager
