WWWWWW

Current Directory: /opt/saltstack/salt/lib/python3.10/site-packages/salt/modules
Viewing File: /opt/saltstack/salt/lib/python3.10/site-packages/salt/modules/linux_sysctl.py
"""
Module for viewing and modifying sysctl parameters
"""

import logging
import os
import re

import salt.utils.data
import salt.utils.files
import salt.utils.path
import salt.utils.stringutils
import salt.utils.systemd
from salt.exceptions import CommandExecutionError

log = logging.getLogger(__name__)

# Define the module's virtual name
__virtualname__ = "sysctl"

# TODO: Add unpersist() to remove either a sysctl or sysctl/value combo from
# the config


def __virtual__():
    """
    Only run on Linux systems
    """
    if __grains__["kernel"] != "Linux":
        return (
            False,
            "The linux_sysctl execution module cannot be loaded: only available on"
            " Linux systems.",
        )
    return __virtualname__


def _which(cmd):
    """
    Utility function wrapper to error out early if a command is not found
    """
    _cmd = salt.utils.path.which(cmd)
    if not _cmd:
        raise CommandExecutionError(f"Command '{cmd}' cannot be found")
    return _cmd


def default_config():
    """
    Linux hosts using systemd 207 or later ignore ``/etc/sysctl.conf`` and only
    load from ``/etc/sysctl.d/*.conf``. This function will do the proper checks
    and return a default config file which will be valid for the Minion. Hosts
    running systemd >= 207 will use ``/etc/sysctl.d/99-salt.conf``.

    CLI Example:

    .. code-block:: bash

        salt -G 'kernel:Linux' sysctl.default_config
    """
    if (
        salt.utils.systemd.booted(__context__)
        and salt.utils.systemd.version(__context__) >= 207
    ):
        return "/etc/sysctl.d/99-salt.conf"
    return "/etc/sysctl.conf"


def show(config_file=False):
    """
    Return a list of sysctl parameters for this minion

    config: Pull the data from the system configuration file
        instead of the live data.

    CLI Example:

    .. code-block:: bash

        salt '*' sysctl.show
    """
    ret = {}
    if config_file:
        # If the file doesn't exist, return an empty list
        if not os.path.exists(config_file):
            return []

        try:
            with salt.utils.files.fopen(config_file) as fp_:
                for line in fp_:
                    line = salt.utils.stringutils.to_str(line).strip()
                    if not line.startswith("#") and "=" in line:
                        key, value = line.split("=", 1)
                        ret[key.rstrip()] = value.lstrip()
        except OSError:
            log.error("Could not open sysctl file")
            return None
    else:
        _sysctl = "{}".format(_which("sysctl"))
        cmd = [_sysctl, "-a"]
        out = __salt__["cmd.run_stdout"](cmd, output_loglevel="trace")
        for line in out.splitlines():
            if not line or " = " not in line:
                continue
            comps = line.split(" = ", 1)
            ret[comps[0]] = comps[1]
    return ret


def get(name):
    """
    Return a single sysctl parameter for this minion

    CLI Example:

    .. code-block:: bash

        salt '*' sysctl.get net.ipv4.ip_forward
    """
    _sysctl = "{}".format(_which("sysctl"))
    cmd = [_sysctl, "-n", name]
    out = __salt__["cmd.run"](cmd, python_shell=False)
    return out


def assign(name, value):
    """
    Assign a single sysctl parameter for this minion

    CLI Example:

    .. code-block:: bash

        salt '*' sysctl.assign net.ipv4.ip_forward 1
    """
    value = str(value)

    tran_tab = name.translate("".maketrans("./", "/."))

    sysctl_file = f"/proc/sys/{tran_tab}"
    if not os.path.exists(sysctl_file):
        raise CommandExecutionError(f"sysctl {name} does not exist")

    ret = {}
    _sysctl = "{}".format(_which("sysctl"))
    cmd = [_sysctl, "-w", f"{name}={value}"]
    data = __salt__["cmd.run_all"](cmd, python_shell=False)
    out = data["stdout"]
    err = data["stderr"]

    # Example:
    #    # sysctl -w net.ipv4.tcp_rmem="4096 87380 16777216"
    #    net.ipv4.tcp_rmem = 4096 87380 16777216
    regex = re.compile(rf"^{re.escape(name)}\s+=\s+{re.escape(value)}$")

    if not regex.match(out) or "Invalid argument" in str(err):
        if data["retcode"] != 0 and err:
            error = err
        else:
            error = out
        raise CommandExecutionError(f"sysctl -w failed: {error}")
    new_name, new_value = out.split(" = ", 1)
    ret[new_name] = new_value
    return ret


def _sanitize_sysctl_value(value):
    """Replace separating whitespaces by exactly one tab.

    On Linux procfs, files such as /proc/sys/net/ipv4/tcp_rmem or many
    other sysctl with whitespace in it consistently use one tab. When
    setting the value, spaces or tabs can be used and will be converted
    to tabs by the kernel (when reading them again).
    """
    return re.sub(r"\s+", "\t", str(value))


def persist(name, value, config=None):
    """
    Assign and persist a simple sysctl parameter for this minion. If ``config``
    is not specified, a sensible default will be chosen using
    :mod:`sysctl.default_config <salt.modules.linux_sysctl.default_config>`.

    CLI Example:

    .. code-block:: bash

        salt '*' sysctl.persist net.ipv4.ip_forward 1
    """
    if config is None:
        config = default_config()
    edited = False
    # If the sysctl.conf is not present, add it
    if not os.path.isfile(config):
        sysctl_dir = os.path.dirname(config)
        if not os.path.exists(sysctl_dir):
            os.makedirs(sysctl_dir)
        try:
            with salt.utils.files.fopen(config, "w+") as _fh:
                _fh.write("#\n# Kernel sysctl configuration\n#\n")
        except OSError:
            msg = "Could not write to file: {0}"
            raise CommandExecutionError(msg.format(config))

    # Read the existing sysctl.conf
    nlines = []
    try:
        with salt.utils.files.fopen(config, "r") as _fh:
            # Use readlines because this should be a small file
            # and it seems unnecessary to indent the below for
            # loop since it is a fairly large block of code.
            config_data = salt.utils.data.decode(_fh.readlines())
    except OSError:
        msg = "Could not read from file: {0}"
        raise CommandExecutionError(msg.format(config))

    for line in config_data:
        if "=" not in line:
            nlines.append(line)
            continue

        # Strip trailing whitespace and split the k,v
        comps = [i.strip() for i in line.split("=", 1)]

        if comps[0].startswith("#"):
            # Check for comment lines after stripping leading whitespaces.
            nlines.append(line)
            continue

        if name == comps[0]:
            # This is the line to edit
            sanitized_value = _sanitize_sysctl_value(value)
            if _sanitize_sysctl_value(comps[1]) == sanitized_value:
                # It is correct in the config, check if it is correct in /proc
                if _sanitize_sysctl_value(get(name)) != sanitized_value:
                    assign(name, value)
                    return "Updated"
                else:
                    return "Already set"

            nlines.append(f"{name} = {value}\n")
            edited = True
            continue
        else:
            nlines.append(line)
    if not edited:
        nlines.append(f"{name} = {value}\n")
    try:
        with salt.utils.files.fopen(config, "wb") as _fh:
            _fh.writelines(salt.utils.data.encode(nlines))
    except OSError:
        msg = "Could not write to file: {0}"
        raise CommandExecutionError(msg.format(config))

    assign(name, value)
    return "Updated"
F1l3 Manager
